Statistical characterization of spatial and size distributions of particles in composite materials used in the manufacturing of biomedical instruments
Main Article Content
Abstract
Aluminium is extensively used in many manufacturing processes because of its intrinsic properties like soft, ductile, high electrical conductivity and highly corrosion resistant. Unfortunately, pure aluminium cannot give a required tensile strength, whereas by adding some other materials like particles of silicon carbide can give a proper strength and converted into a composite with adequate properties which is most suitable in the manufacturing of some specific biomedical instruments. It is well known that size and spatial distributions of particles are both influential in determining the mechanical properties of composite materials and, therefore, statistical characterization of these distributions is of prime importance if we wish to control the quality of the manufacturing processes for these materials. Many researchers have considered quantitative analysis of these features separately, but here we investigate the relationship between size and spatial distribution of the particles over an aluminium matrix. We have considered the actual sizes simply as ‘large’ or ‘small’ and, consequently, the characterization of the particle distribution patterns in the aluminium matrix can be carried out using statistical methods based on the theory of bivariate spatial point processes. We have applied this statistical approach to a sample of an aluminium alloy reinforced with silicon carbide particles. It is shown that the methods provide a complete characterization on the spatial interaction between small and large silicon carbide particles and it can be successfully used in a quality control step for the production of particulate composite materials used in the manufacturing of biomedical instruments.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
References
Baddeley, A.,Møller, J. &Waagepetersen, R. P. Non-and semi-parametric estimation of interaction in inhomogeneous point patterns. Statistica Neerlandica 54, 329–350(2000).
Baddeley, A.,Rubak, E.&Turner, R. Spatial Point Patterns: methodology and applications with R. (CRC Press, 2016).
Baddeley, A. &Turner, R. Spatstat: an Rpackage for analyzing spatial point patterns. Journal of Statistical Software, 12, 1–42 (2005).
Baddeley, A. &Turner, R. Modelling spatial point patterns in R. In: A. Baddeley, P. Gregori, J. Mateu, R. Stoica, D. Stoyan (Eds.), Case Studies in Spatial Point Pattern Modelling. (Springer-Verlag, 2006).
Chawla, N.&Shen, Y. H. Mechanical behavior of particle reinforced metal matrix composites. Advances in Engineering of Materials 3, 357–370 (2001).
Cetin, A.&Kalkanli, A. Multi-scale characterization of particle clustering in discontinuously reinforced composite. Materials Characterization 60, 268–572 (2009).
Davison, D. L. Fatigue and fracture toughness of aluminium alloys reinforced with SiCand alumina particles. Composites 24, 248–255 (1993).
Derr, R. & Ji, C. Fitting microstructural models in Materials Science. www.unc.edu/depts/stator/miscellaneous/cji/scan05.pdf. 2000.
Diggle,P. J. Statistical Analysis of Spatial Point Patterns. (Hodder Education, 2003).
Diggle, P. J.,Eglen, S. J. &Troy, J. B. Modelling the bivariate spatial distribution of amacrine cells, In: A. Baddeley, P. Gregori, J. Mateu, R. Stoica, D. Stoyan (Eds.). Case Studies in Spatial Point Pattern Modelling.(Springer-Verlang, 2006).
Dwivedi, S. P.,Maurya, M.&Chauhan, S. S. Mechanical, physical and thermal behaviour of SiC and MgO reinforced aluminium based composite material. EVERGREEN Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy 8, 318–327 (2021).
Fathy, A.,Sadoun, A &Abdelhameed, M. Effect of matrix/reinforcement particle size ratio (PSR) on the mechanical properties of extruded Al–SiC composites. International Journal of Advanced Manufacturing Technology 73,1049–1056 (2014).
Ghosh, S,Nowak, Z. & Lee, K. Quantitative characterization and modeling of composite microstructures by Voronoi cells. Acta Materialia 45, 1215–1234(1997)
Hong, S. J. et al. Effect of clustering on the mechanical properties of SiC particulate reinforced aluminum alloy 2024 metal matrix composites. Material Science and Engineering A 347,198–204 (2003).
Lewandowski, J. J.,Liu, C.&HuntJr., W. H. Effects of matrix microstructure and particles distribution on fracture of aluminum metal matrix composites. Material Science and Engineering A107,241–255 (1989).
Lotwick, H. W. &Silverman, B. W. Methods for analyzing spatial processes of several types of points. Journal of the Royal Statistical Society B 44, 406-413(1982).
Møller, J. &Waagepetersen, R. Statistical Inference and Simulation for Spatial Point Processes. Boca Raton: Chapman and Hall/CRC, 2003.
Murphy, A. M.,Howard, S. J.&Clyne, T. W. Characterization of severity of particle clustering and its effect on fracture of particulate MMC's. Journal of Material Science and Technology 14, 959–969 (1989).
Narayanasamy, R.,Ramesh, T.&Prabhakar, M. Effect of particle size of SiC in aluminum matrix on workability and strain hardening behavior of P/M composite. Material Science and Engineering A 504, 13–23(2009).
Pegel, S. et al. Spatial statistics of carbon nanotube polymer composites. Polymer 50, 2123–2132 (2009).
Pyrz, R. Quantitative description of the microstructure of composites. Part I: Morphology of unidirectional composite systems. Composite Science and Technology 50,197–208 (1994).
R core team, R: a language and environment for statistical computing. Viena: R Foundation for Statistical Computing, http://www.R-project.org. 2022.
Ripley, B. D. The second-order analysis of stationary processes. Journal of Applied Probability 13, 255–266(1976).
Ripley, B. D.&Kelly, F. P. Markov point processes. Journal of the London Mathematical Society 15, 188–192(1977).
Salernitano, E. &Migliaresi, C. Composite Materials for Biomedical Applications: A Review. Journal of Applied Biomaterials and Biomechanics 1, 3–18 (2003).
Scalon, J. D. et al. Spatial pattern analysis of second-phase particles in composite materials. Material Science and Engineering A 356, 245-257(2003).
Scalon, J. D. et al. A model-based analysis of particle size distributions in composite materials. Acta Materialia 51,997–1006 (2003a).
Spitzig, W. A., Kelly&J. F. Richmond, O. Quantitative characterization of second-phase populations. Metallography 18 ,235–261(1985).
Stoyan, D. Systems of hard particles: Models and statistics. Chinese Journal of Stereology and Image Analysis 7, 1–14 (2002).
Stoyan, D.&Schnabel, H. D. Description of relations between spatial variability of microstructure and mechanical strength of alumina ceramics. Ceramic International 16, 11-18 (1990).
Stoyan, D.&Stoyan, H. On one of Matern’s hard-core point process models. Mathematische Nachrichten 122,205-214 (1985).
Stoyan, D. &Wiencek, K. Spatial correlations in metal structures and their analysis. Material Characterization 26, 167-176 (1991).
Torralba, J. M.,Costa, C. E.&Velasco, F. P/M aluminum matrix composites: an overview. Journal of Material Procedures Technology 133, 203–206 (2003).
Turner, R. &Baddeley, A. Practical maximum pseudolikelihood for spatial point patterns. Australian and New Zealand Journal of Statistics 42, 283–322 (2000).
Willians, J. J. Effect of overaging and particle size on tensile deformation and fracture of particle-reinforced aluminum matrix composites. Metallurgical and Materials Transactions A33, 3861–3869 (2002).
Wincek, K.&Stoyan, D. Correlations in metal structures and their analysis. II: The covariance. Material Characterization 38, 47-53 (1993).